Part No. : 2D1-03961 | Alternate P/N : 2D103961 | Manufacturer : oldenburg group incorporated |
Item Name: gearshaft spur | NSN: 3040-01-449-0665 (3040014490665) | CAGE Code: 34712 |
FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number 2D1-03961 from Oldenburg Group Incorporated which is described as a Gearshaft Spur component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 2D1-03961 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040014490665 and was produced under the CAGE Code 34712. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 2D1-03961 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 2D1-03961
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3040-01-449-0665 Item Description: Gearshaft Spur | 3040 | 014490665 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
2d1-03961 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
ABHP | OVERALL LENGTH | 18.500 INCHES NOMINAL |
AGAV | END ITEM IDENTIFICATION | STRATEGIC SEALIFT CONVERSION SHIPS CLASS |
AJLA | TEETH QUANTITY | 23 |
AJWS | GEAR OUTSIDE DIAMETER | 6.250 INCHES NOMINAL |
ANJS | SHAFT END TYPE | PLAIN AND PLAIN |
AQGH | DIAMETRAL PITCH | 4 |
AQPL | FACE WIDTH | 5.250 INCHES NOMINAL |
CRSJ | SHAFT TYPE | SHOULDERED |
CWPP | PRESSURE ANGLE | 25.0000 DEGREES |
CYEQ | SHAFT MATERIAL | STEEL COMP 8620 |
CYER | GEAR MATERIAL | STEEL COMP 8620 |
CYES | HARDNESS RATING AND LOCATION | 55.0 ROCKWELL C MINIMUM TEETH AND 60.0 ROCKWELL C MAXIMUM TEETH |
CYET | SHAFT LARGEST DIAMETER | 4.000 INCHES NOMINAL |
CYEU | GEAR LOCATION ON SHAFT | OFF CENTER BETWEEN ENDS OF SHAFT |
CYEV | LONGER SHAFT SEGMENT LENGTH | 10.375 INCHES NOMINAL |
CYEW | SHAFT END SIZE | 3.347 INCHES AND 3.347 INCHES |
FEAT | SPECIAL FEATURES | SPERICAL ROLLER BEARINGS INCLUDED ON EACH END |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload