Part No. : 2D1-03960 | Alternate P/N : 2D103960 | Manufacturer : oldenburg group incorporated |
Item Name: gearshaft helical | NSN: 3040-01-449-1735 (3040014491735) | CAGE Code: 34712 |
FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number 2D1-03960 from Oldenburg Group Incorporated which is described as a Gearshaft Helical component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 2D1-03960 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040014491735 and was produced under the CAGE Code 34712. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 2D1-03960 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 2D1-03960
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3040-01-449-1735 Item Description: Gearshaft Helical | 3040 | 014491735 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
2d1-03960 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AGAV | End Item Identification | STRATEGIC SEALIFT CONVERSION SHIPS CLASS |
CYES | Hardness Rating And Location | 310.0 BRINELL HULTGREN MINIMUM OVERALL AND 330.0 BRINELL HULTGREN MAXIMUM OVERALL |
CWNM | Tooth Direction | RIGHT |
CYEQ | Shaft Material | STEEL COMP 4340 |
CYEW | Shaft End Size | 2.370 INCHES AND 2.500 INCHES |
CWPZ | Helix Angle | 15.0000 DEGREES |
AQPL | Face Width | 3.250 INCHES NOMINAL |
CRSJ | Shaft Type | SHOULDERED |
CYET | Shaft Largest Diameter | 2.750 INCHES NOMINAL |
CWMW | Teeth Type | SINGLE HELIX |
AJWS | Gear Outside Diameter | 5.855 INCHES NOMINAL |
AJLA | Teeth Quantity | 32 |
CYER | Gear Material | STEEL COMP 4340 |
ANJS | Shaft End Type | KEYWAY FLAT AND KEYWAY FLAT |
CWPP | Pressure Angle | 20.0000 DEGREES |
MRC | Decoded Requirement | Clear Text Reply |
CYEU | Gear Location On Shaft | OFF CENTER BETWEEN ENDS OF SHAFT |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload