Part No. : 63B10856 | Manufacturer : springfield armory | Item Name: shaft straight |
NSN: 3040-00-919-8597 (3040009198597) | CAGE Code: 19205 | FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number 63B10856 from Springfield Armory which is described as a Shaft Straight component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 63B10856 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040009198597 and was produced under the CAGE Code 19205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 63B10856 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 63B10856
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3040-00-919-8597 Item Description: Shaft Straight | 3040 | 009198597 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
63b10856 | 5 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |
AAHN | END SIMILARITY | NOT IDENTICAL |
AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
ABHP | OVERALL LENGTH | 3.690 INCHES MINIMUM AND 3.720 INCHES MAXIMUM |
AMDL | FIRST END DIAMETER | 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
AMDX | FIRST END HOLE DIAMETER | 0.1260 INCHES MINIMUM AND 0.1280 INCHES MAXIMUM |
AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.300 INCHES NOMINAL |
AMEB | FIRST END HOLE DEPTH | 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
AMFZ | SECOND END DIAMETER | 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
AMGS | SECOND END HOLE DIAMETER | 0.1260 INCHES MINIMUM AND 0.1280 INCHES MAXIMUM |
AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 1.375 INCHES NOMINAL |
AMHD | SECOND END HOLE DEPTH | 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
CSYM | SURFACE FINISH | 125.0 MICROINCHES |
MATT | MATERIAL | STEEL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 MIL SPEC SINGLE MATERIAL RESPONSE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload