Part No. : 63B10889 | Manufacturer : springfield armory | Item Name: shaft straight |
NSN: 3040-00-919-8599 (3040009198599) | CAGE Code: 19205 | FSC: 3040 Miscellaneous Power Transmission Equipment |
If you require part number 63B10889 from Springfield Armory which is described as a Shaft Straight component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number 63B10889 which is listed under the Federal Supply Class 3040 Miscellaneous Power Transmission Equipment. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 3040009198599 and was produced under the CAGE Code 19205. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part 63B10889 today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. 63B10889
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3040-00-919-8599 Item Description: Shaft Straight | 3040 | 009198599 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
63b10889 | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAGZ | FIRST END STYLE | UNTHREADED CROSS DRILLED |
AAHN | END SIMILARITY | NOT IDENTICAL |
AAHP | SECOND END STYLE | UNTHREADED CROSS DRILLED |
ABHP | OVERALL LENGTH | 2.510 INCHES MINIMUM AND 2.570 INCHES MAXIMUM |
AMDL | FIRST END DIAMETER | 0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
AMDX | FIRST END HOLE DIAMETER | 0.0940 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM |
AMDZ | FIRST END DISTANCE FROM HOLE CENTER TO END | 0.240 INCHES NOMINAL |
AMEB | FIRST END HOLE DEPTH | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
AMFZ | SECOND END DIAMETER | 0.2490 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
AMGS | SECOND END HOLE DIAMETER | 0.0940 INCHES MINIMUM AND 0.0970 INCHES MAXIMUM |
AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.420 INCHES NOMINAL |
AMHD | SECOND END HOLE DEPTH | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
CSYM | SURFACE FINISH | 125.0 MICROINCHES |
MATT | MATERIAL | STEEL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 MIL SPEC SINGLE MATERIAL RESPONSE |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload