Part No. : AIC1165-3-3P | Alternate P/N : AIC116533P | Manufacturer : sps technologies ltd |
Item Name: screw close tolerance | NSN: 5305-01-303-9653 (5305013039653) | CAGE Code: 06725 |
FSC: 5305 Screws |
If you require part number AIC1165-3-3P from Sps Technologies Ltd which is described as a Screw Close Tolerance component ASAP Logistic Solutions is your sourcing solution. On this page, you can request a quote on part number AIC1165-3-3P which is listed under the Federal Supply Class 5305 Screws. To ensure that you only procure the exact item you need to be sure to note that this particular product is listed with the NSN 5305013039653 and was produced under the CAGE Code 06725. To learn more about this listing or to simply initiate the purchasing process, complete and submit the RFQ form on this page for part AIC1165-3-3P today Within 15 minutes of receiving and reviewing a completed request based on the information you provide a member of our staff will contact you to provide a tailored solution to your comparison needs. AIC1165-3-3P
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5305-01-303-9653 Item Description: Screw Close Tolerance | 5305 | 013039653 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
Aic1165-3-3p | 5 | 9 | 5 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3A |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AASA | THREAD LENGTH | 0.381 INCHES MINIMUM AND 0.431 INCHES MAXIMUM |
AASB | FASTENER LENGTH | 0.579 INCHES MINIMUM AND 0.609 INCHES MAXIMUM |
AASK | HEAD STYLE | FLAT COUNTERSUNK |
AASL | HEAD DIAMETER | 0.376 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
ANEE | GRIP LENGTH | 0.178 INCHES MINIMUM AND 0.198 INCHES MAXIMUM |
CBBL | FEATURES PROVIDED | CETYL ALCOHOL LUBRICANT |
CQBC | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
MATT | MATERIAL | STEEL CORROSION RESISTING OVERALL |
SFTT | SURFACE TREATMENT | ALUMINUM OVERALL AND CHROMATE OVERALL |
STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-83488 TY 2 CL 3 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
CMLP | THREAD QUANTITY PER INCH | 32 |
ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
THSD | THREAD SERIES DESIGNATOR | UNJF |
If you have more than one item, you can also send us your part number list (Spreadsheet) by uploading your list here.
Upload